Click image to enlarge

This Modem provides connectivity via satellite  for equipment with  serial RS232  interfaces

MODEM SPECIFICATIONS 

Supported Services

Circuit Switched Data  9.6kb/s

Contact us for more Information

Next G and Satellite GPRS Modemwith Intelligent Programmable logic controller

•    Equipment can be started or stopped remotely by SMS commands.
•    Alarms can be sent to any mobile phone(s) via SMS.
•    On-board switch-mode power supply can accept unregulated 7-40V DC in.
•     8 x Optically isolated digital inputs (expandable on-board to 16 in) can accept signals of up to 48 V DC.
•     2 x Analog inputs @ 0-10 V.
•     4 x Relay outputs (expandable on-board to 8 out), each capable of switching 5A at 240V AC.

•     Analogs can be programmed to log on time period, conditional upon minimum % change.
•     Satellite Coverage over all of Australia and 110 countries across Asia, Europe and Africa.

•     “Pass-through” port, configurable as RS232 or RS485.
•     Two-way translation between Modbus protocol and SMS, for direct interface to industrial controllers.
•     Operating temperature: -25 to +70C
•     Humidity 5-95% non-condensing
•     Enclosure dimensions: 195mm x 125mm x 50mm Approx

The ideal device for monitoring and control of remotely located equipment from mobile phone's and PC's. Designed to operate with the Thuraya Satellite Network using Satellite GPRS andSMS.

Integrated controller, modem, power supply, relays and isolated inputs. Includes PC-based configuration and monitoring software.  Low power operation – engineered for solar applications. Configurable “watchdog” function to confirm system operation. Cross dependency of inputs e.g. “pressure fault only examined if pump is running for 30 sec.”  Relay outputs can be controlled by SMS, programmed sequence, and directly from alarm inputs. Versatile software control, including “one-touch” remote activation of complete control sequences. Optical isolation of digital inputs – wide input range. Digital inputs can be configured as pulse-count totalisers or proportional frequency inputs. Optional ultra-low power digital radio link between modules (up to 5km, depending on terrain).

Contact us for more Information

Datamonitor is a simple to use web interface that displays the remote data from the T2000.  Users can create their own layout of gauges and controls corresponding to the remote input/outputs. The application is entirely web based and can be viewed from any web browser or smart phone.

  Features

• Ability to display analogue and digital data.
• MODBUS input data display and control. (Most PLC's brands are compatible)
• User configurable layouts which can be tailored to specific tasks.
• Auto updating, if remote device input changes it changes gauges without requiring a browser refresh
• Multiple view only accounts, status of remote equipment can be viewed by many.

• Full web application implementation, no hardware or software required at local customer site.
• GPS mapping functionality, uses T2000 GPS location to provide mini map location.
• Flexibility, can be used for fixed site sensor data or a fleet tracking system.
• Report creation into PDF or XL.
• Summary view. Live overview of all devices simultaneously.
• Designed to work with NextG, Thuraya and Inmarsat services.
• Database back-end, all data is retained in a data base giving historical data functionality.

Contact us for more Information

The Ranger BGAN has been specially developed for Telemetry and SCADA

See additional information on this BGAN Terminal on our BGAN page

Back to TOP